Longlines are weighted to get baited hooks rapidly out of the range of feeding seabirds. Line weighting is a primary mitigation measure and a key component in all successful reductions in seabird bycatch in pelagic longline fisheries. Line weighting should be used in conjunction with streamer lines and night-setting.
A streamer line (also called a tori or bird scaring line) is a line with streamers that is towed from a high point near the stern of a vessel as baited hooks are deployed. They are the most commonly prescribed seabird bycatch mitigation measure for longline fisheries. However, recent evidence shows that they are not fully effective unless combined with other mitigation measures, i.e., branchline weighting and night setting.
Double-weight branchlines are designed to reduce seabird bycatch in pelagic longline fisheries when used in combination with tori lines and in some cases night setting. The double-weight configuration is designed to 1) sink pelagic longline hooks beyond the range of seabird attacks within the aerial extent of a tori line during line setting, and 2) reduce injuries to crew should a hook come free while under tension in the landing process and recoil back at the vessel.
Seabirds are attracted to fishing vessels to feed on processing waste and discarded fish. Discharging offal on the opposite side to the hauling hatch helps to divert their attention away from the area where hooks return to the surface.
Night or day setting refers to the times of day when longliners set, soak and haul their lines. These variables are inherently linked to the duration of the soak (the period that the longline is in the water). Timing depends principally on the target species, but also varies among fleets and regions.
Safe handling and release refers to using best practice methods for dealing with bycatch species, to maximise their chances of survival after interacting with fishing gear. It can also include vessel manoeuvring to avoid taking bycatch species, for example, avoiding setting purse seines on whale sharks. Illustrated Guides and more general literature have been collected in the BMIS.
Spatial and temporal measures aim to avoid or minimise bycatch by either temporarily or permanently moving fishing out of an area (e.g., time and area closures, marine protected areas), or requiring that particular mitigation techniques be adopted in an area. They are predominantly mandatory (i.e., fisheries regulations) but can be voluntary and the areas that they apply to may be dynamic, e.g., around an ocean front, or static, e.g., around a seamount or below a specified latitude.
The Hookpod protects the point and barb of baited hooks from seabird attack during line setting. Branch line weighting at the hook maximises hook sink rate. When a predetermined depth is reached a pressure release system ensures that the pod opens, releasing the hook to begin fishing. ACAP (May 2019) recommends that approved hook-shielding devices can be used as stand-alone measures or with other measures, such as bird-scaring lines and night setting.
Sliding Leads are an alternative to leaded swivels. They are designed to increase branch line sink rates (to get baited hooks rapidly out of the range of feeding seabirds) and protect crew safety. Sliding Leads slide away from crew during bite offs or when the line breaks under tension, thereby greatly reducing the incidence of dangerous fly-backs towards the vessel, as can occur with leaded swivels.
'Hook shielding device' is a term used to describe mitigation techniques which - via different methods - protect the point and barb of baited hooks from seabird attack during line setting. There is potential for these devices to reduce sea turtle bycatch but this is yet to be examined. See 'Hook Pod' and 'Smart Tuna Hook'.
Bait condition and bait size play a part in bait sink rate. The faster bait sinks, the less available it is to predatory seabirds during line setting. Bait condition also plays a part in the ease of hooking ('baiting') and whether the bait will stay on the hook (quality).
Side-setting requires the longline hook setting operation to move to the side of the vessel. Birds are unable or unwilling to forage for bait close to the side of a vessel. Additionally, side-setting avoids setting baited hooks into the propeller wash, which slows the sink rate of stern set hooks.
The Smart Tuna Hook system prevents hooking of seabirds and turtles during line setting by protecting a baited hook with a metal shield, which is held in place with a biodegradable pin. The pin dissolves once the hook is below the feeding depth of seabirds (25 m) and turtles (100 m). Once the pin dissolves, the shield is released and the baited hook is ready for fishing.
Note: The similarly named 'Smart Hook' is a hook designed to deter sharks from approaching longline baits; see 'Magnetic, E+ metals and Electrical deterrents'.
In theory, dyeing bait blue reduces the contrast between the bait and the surrounding seawater making it more difficult for foraging seabirds to detect. Alternative theories suggest that seabirds are simply less interested in blue-dyed bait compared with undyed controls. Practical issues of dyeing bait at-sea and the inconsistent results of experimental trials suggest that blue-dyed bait is not an appropriate primary mitigation measure.
Underwater setting techniques are means of deploying baited hooks below the surface of the sea, out of the sight and reach of foraging seabirds. None are currently recommended as a mitigation method, though they are noted as under development (ACAP 2019).
LED illumination of nets has been used successfully to reduce sea turtle bycatch without reducing target catch.
Some vessels have experimented with water cannons or fire hoses to deter birds from approaching the hauling station.
Using sound to discourage or distract bycatch species from interacting with fishing gear. Auditory deterrents are not generally considered useful in reducing bycatch of seabirds, turtles and sharks, except in limited circumstances. In the main, this is because the feasibility and long-term effectiveness of an acoustic deterrent is affected by habituation. Acoustic deterrents are used with some success for marine mammals.
Management of abandoned, lost, discarded fishing gear (ALDFG) refers to the management of fishing gear (onboard and deployed, e.g., FADs) and retrieval of lost gear as a means of reducing fisheries bycatch and environmental damage. Tuna RFMOs have adopted binding measures and data collection protocols, as well as encouraging voluntary measures, to address the issue.
The use of chemical attractants or deterrents in longline and purse seine fisheries aims to exploit differences in sensory biology between target and non-target species, improving the specificity of fishing and thus reducing bycatch.
A line shooter is a hydraulically operated device designed to deploy the mainline at a speed faster than the vessel’s forward motion, which removes tension from the longline. This allows the mainline to enter the water immediately astern of the vessel, rather than up to 30 m behind the vessel. It has been demonstrated that variation in tension on the mainline will affect the sink rates of baited hooks and therefore the risks to seabirds.
A Bait Casting Machine (BCM) is a hydraulically operated device designed to deploy baited hooks during pelagic longline setting (prior to the development of BCMs, individual hooks were cast by hand). BCMs are commonly used in high seas pelagic fisheries and are an integral part of the line setting process.
The Brickle Curtain is a deterrent device that forms a protective barrier around the hauling hatch. It is composed of vertically hanging streamers supported by poles fixed to the railing above the hauling hatch.
In pelagic longline fisheries, branchlines can be 40 m long. During hauling, each branchline is hauled individually on, or close to, the surface. At this time, birds will attempt to snatch retained bait. The use of a branchline hauler can speed up the hauling process making it more difficult for birds to catch bait.
The Seabird Saver is a recently developed technology combining a laser and an optional acoustic deterrent. It has been designed for longline, purse seine and trawl fisheries, among others, with the aim of scaring many different seabird species from interacting with bait, catch or discards. ACAP regards lasers as unproven & not recommended, with concerns about safety for both seabirds & humans.
Please ignore me.
Monofilament (nylon) line is used widely in the fishing industry. It is commonly used for both the mainline (the longline) and branchlines (which hang off the main longline and are also known as snoods or gangions/ganglions). Branchlines may incorporate a section of line (of variable length) known as a leader, with a lead weight at one end and the baited hook at the other. Leaders made of wire have implications for sharks and seabirds.
Light attractors, including chemical lightsticks and battery-powered light-emitting diodes (LEDs), are attached near baited hooks on branchlines to attract fish. They also appear to attract sea turtles; strategies are needed to make them less attractive or invisible to turtles. Gillnet illumination has been shown to reduce both seabird and sea turtle bycatch.
Bycatch rates can vary among fishing vessels operating in the same fishery, even after accounting for factors such as vessel size and fishing effort, and these differences can persist from year to year.
Corrodible hooks are fishing hooks composed of material other than stainless steel. They may be made from different alloys, with different coatings, which all affect how long they last. The hook may dissolve quickly, within a couple of days, or more slowly over weeks or months. The premise behind the use of corrodible hooks is that they should improve the mortality rate of bycatch released with a hook attached. However, this needs to be tested through tagging studies.
'Gear configuration - other' is a catch-all for changes in the deployment of fishing gear (aimed at reducing bycatch) that are not covered by other mitigation methods listed in this database. Examples include gear-switching and gear modification.
Stealth fishing gear refers to fishing gear and bait that have been camouflaged to deceive predatory species. For bycatch species such as marine turtles and seabirds, the aim is to reduce the detection of bait. For target species, such as swordfish and tunas, the aim is to reduce the detection of the fishing gear and thus increase catch rates.
Shark decoys have been shown to work as sea turtle 'scarecrows', though these decoys also frightened-off target finfish species (tunas, billfish, mahi-mahi). Trials with 'Looming Eye Buoys', to deter seabirds from gillnets, are underway.